Geothermal Heating

Archive for January, 2010

Gel Fireplaces – What price romance?

Comments Off

January 31st, 2010 Posted 2:01 am

Gel fireplaces are an easy and inexpensive way to add charm, beauty and warmth of almost every room of your house.

Can be in many different styles and finishes, with glass accents and curiosity cabinets are ordered.

Most gel fireplaces sell for $ 350 – $ 500, but the price for specific models can differ from what 10% of the dealer to the distributor.

Also shipping prices vary greatly. For example, Home Shopping Network charges $ 55 for sending the same gelfireplace that Target ships for free.

Gel fireplaces are also known as vent fireplaces less than some online stores. Most of the time refer fireplaces gel, but the term is also used to describe electric fireplaces.

If your fireplace online, or by a supplier of local purchases, you can look forward to spending some 'quality time with your tools while you put together. September normal time is less than an hour.

There are two complaints gelfireplace owners. One is a faint odor of alcohol from the gel combustion. You can bring a scent stick in the gel or the purchase of one of the most recent scented gel has to be solved.

The second problem is the replacement of the cover in a container of gel that burns without burning yourself. A simple magnetic opener near $ 10 solves this problem.

Gel vs Electric Fireplace: Heat Output electric fireplace heater is rated at 1500 watts (5120 Btu) and is designed to heat about 200 square meters, orA 12 'x 16' room.

The warmth of a fireplace gel is determined by the number of bottles of gel burning at once. According Sunjel Industries, a possible single from their gel generates 3000 Btu. As is the case, you will burn two cans of gel to approximate the heat of an electric fireplace.

Gel vs Electric Fireplace: The cost of the operation of an electric fireplace, rated at 1500 watts uses 1.5 kilowatts of electricity per hour. When you fold 1.5 x 10 centskilowatt hour (the average price of electricity in the United States) that the final cost to operate is 15 cents an hour.

You can of gel costs about $ 2 and burns for 2 1 / 2 – 3 hours. Two cans burning simultaneously would cost $ 1.33 per hour, or $ 1.18 per hour more than the electric fireplace.

But what price romance? Will cost Droning of an electric fan stack or the magic of a crackling fire in a fireplace gel?

Geothermal

Comments Off

January 30th, 2010 Posted 1:58 am

Geothermal heating is a process that has been used since Roman times. It 'a way of building heat / thermal hot springs that use that already exist near the earth's surface. In locations where geothermal resources are available, it is possible to distribute hot water to multiple buildings. The process of geothermal heating is often seen in countries like, Reykjavik, Iceland, Idaho, USA.

In recent years> Geothermal heating is carried out using a geothermal heat pump. The system of heating and air conditioning uses the earth's capacity to store heat in the ground and in the masses of warm water. These masses absorb and retain heat. During sunny days when the heat is not needed, this thermal mass to store heat and release it when the weather becomes cloudy or at night, when the atmosphere cooled.

A geothermal heat pump uses the earthmass as a heat exchanger and working on site. It will be the temperature at 50 ° F (10 ° C) throughout the year, with a water-source heat pump uses the heat in the winter and put it back into the soil during the summer.

Electricity from renewable sources like solar and wind energy can also be a geothermal heat pump used for heating and water. This renewable energy can be more efficient than an electric heater for heating the room andwater.

Through the use of these renewable energy through geothermal heat pump heats the buildings without the need for transporting and burning biomass on site. Geothermal heat pumps are also easy and requires a deep knowledge of technology.

A geothermal heat pump differs from a furnace or boiler, because it is capable of transferring heat and not just produce. Even if it costs more to install a geothermal heat pump, one to heat your home orThe company is convenient since you will save on average between 35 and 70% on your air conditioning and other costs. The reason behind the height of installation costs because of their age, the geology of the area, the location of your property and square feet of living must be considered.

There are three components needed for a geothermal heat pump:

• a cycle of field – horizontally or vertically. A field is a loopCurved set of tubes that carry heated water from the earth to the heat pump. Runtime and capacity of different regions of loops, the larger structure, the increased length and capacity of geothermal heating component. Even on the basis of units of geothermal energy, the liquid in the circuit may be in direct contact or indirect contact with the heat source.

• Liquid Pump Pack – This sends the water through the loop field and the source of heat pump water

• WaterSource Heat Pump – This pump is replaced by the furnace or boiler. The heat from the loop area is transferred via this pump to heat the building.

A geothermal heat pump for the environment, is a renewable energy source that is not polluted, and still one of the most efficient heating and cooling are available

Solar Window Heater: facing south Savings

Comments Off

January 29th, 2010 Posted 1:55 am

I recently discovered a low cost, eco-friendly products for your heating system at home fill. It is a compact but efficient heater, solar room designed to be installed in rooms to the south your home or apartment.

Since it is powered by the sun and heated by hot air, is the only mechanical or moving parts is a simple fan to pull air into the heating panel at room temperature through a series of ducts for heating, exhaust and thus the heatingair into space.

The solar window heater base 20 "x 32" x 3.5 "and wrapped in clear pine for painting or staining. See it as a block with an aluminum panel (collector) behind a piece of plexiglass for ' Outdoor air tight, and a thin layer of wood inside the trap heat is collected.

Inside the box are two mystery of it resemble a maze. Allows a continuous flow of air is heated as it is pulled through the fan box.

AluminumCollector panel is finished in flat black to maximize the absorption of heat from the sun. In a day of full sun, the temperature of the panel at 140-170-degree range.

A newer version of the solar heating window instead of the aluminum panel of high-quality copper, even in black on the plate.

Located inside the panel is a thermostat. When the temperature of the heated air, when 120-degree switch automatically activates the fan. When the air temperature cools to 90 degreesor less, the finish of the fans.

The small, efficient fan 102 cubic meters of air per minute or about 6000 cubic meters per hour pass. The price of electricity to operate the fan is approximately $ 3.00 per year.

The basic model retails for about $ 150.00. Copper latest heating solar powered box sells for an extra $ 10

Electrical components are available separately for $ 42.95. It includes the fan, thermostat, control box and transformer Junction. If you are at your fingertips, youcould probably build your own solar heating for about $ 80

Installation of gas fireplace Done right the first time

Comments Off

January 28th, 2010 Posted 1:45 am

Maybe there are some areas in the house 'additional heat can be used, but may be particularly difficult to clean a fireplace was installed to be. If you are considering heating a room with little more than a socket in the plant, it may be time to think about a gas fireplace installation.

Access to the area for a line of gas is required. It is usually not a big problem. Contact your local gas company or heating and aircontractor for details. If you feel that this project yourself, be sure to do your job. This is not a task for beginners.

Although this may happen, some education is needed if you do not want more money to pay a professional to solve your project weekend. Painting, for example, is a great project to do the same, races and all lines of security are very different. One downside of this project could have serious consequences.

Angles are great placesfireplaces taste mode mobile can change over time and in an angular frame will be the placement of furniture, like a fireplace that fills an entire wall to be limited. Matte and end tables can be edited and innovations in the field of electronics continues, the unit wall to the media to change or eliminate it completely.

Installing a gas fireplace and warmth and elegance into a room and also improve usability. When colder temperatures are a warm glow over the fireplaceRoom and called to collect his family for a cup of hot chocolate or brandy.

Sources of carbon dioxide – not only our concern

Comments Off

January 25th, 2010 Posted 12:11 am

Carbon source is not our only source of concern when we consider our environmental impact, particularly in the atmosphere. The biggest problem, with an accumulation of carbon dioxide is its ability to hide or heat-reflecting emitted from the surface absorbs and radiates in all directions, including the Earth. Carbon dioxide is not the only effect of the gases responsible for global warming, though. Water vapor contributes to 70% of the effectalthough it is present in much smaller quantities of CO2. But why is not something that we have caused or may have changed very little attention.

An important factor that must be accounted for, the amount of heat that we produce. Heat and carbon dioxide is added to the atmosphere from fossil fuels, and various forms of alternative energy is currently used in an attempt to resolve this situation. Unfortunately, some of these sources still contribute to the networkamount of heat in the atmosphere, although it could not produce greenhouse gases.

Extract energy from geothermal heat beneath the surface to generate electricity. When the electricity consumed is converted to heat, but the extra heat is now present in the atmosphere and not under the surface.

The same can be said about nuclear power. Decay of radioactive elements is a natural process that releases energy slowly as heat ends. When weconcentrate the radioactive material and use it as a fuel source, is that we are accelerating the rate of heat loss to the atmosphere of what would be the natural state.

The same considerations should also implement the given space-based solar power stations. Would collect the energy that would otherwise go into space and return to Earth. This is actually the same as the increase in the surface of the planet, as the absorption of heat.

The effect of allThis additional heat in the lower atmosphere would be to increase the evaporation from the surface. Given the importance of water vapor is a greenhouse gas, heating element for emission-free energy sources must be considered.

Solar, wind and the river are all well-developed energy technologies currently available to us that this problem. All three methods of extraction of energy already present in the atmosphere or water, and put it into electricity. Solar meansdirectly from sunlight, wind turbines to harvest energy from fast moving particles of air, and the flow of the river converts the movement of water into electricity.

In view of the developed world's energy demand growth, it is important that the role of extra warmth as an important factor when new large power plants are planned.

Stoves – Burn Get More For Your Buck with an update catalytic

Comments Off

January 25th, 2010 Posted 12:10 am

Despite the recent increase in sales of wood pellet stoves and corn, more than 70% of homeowners who, in addition to their existing heating systems still rely on wood stoves.

Stoves have a fuel efficiency rating of 63%. This is 20% less efficient than wood stoves, pellet or corn. There are also stoves advertised catalytic efficiency of 70% -80%. The catalyst for a catalytic stove, form a honeycomb coated with palladium, a catalytic combustor. Here's howworks as follows:

Gases emitted from the wood will burn if the fire is 1000 degrees F or above. If the heat is turned off and the gas inside the combustion chamber is less than 1000 degrees F, which will not burn. But when the gas passes through a catalytic combustor, the act of metal palladium as a catalyst and causes the gas burns at temperatures up to 500 degrees F. This allows the stove to produce the goods, even heat, while extending the burning time of each load of wood.

Catalytic woodfurnaces, also known as EPA-certified wood stoves because they are in compliance with the emission limit of 4.1 grams per hour for the EPA launched in 1988.

If you have an older wood-burning appliance, consider upgrading to one of
recent catalytic wood stove certified by the U.S. Environmental Protection Agency (EPA). High-efficiency appliances not only reduce emissions, but are also often safer, since complete combustion helps to prevent the accumulation of fuelchimney deposits called creosote.

If you want to equip an existing non-catalytic wood burning appliance with a
catalytic combustor, you can buy a catalytic damper. It 'available as a kit and is usually installed in the collar of combustion. For the temperature of the oven after the addition of a catalytic combustor screen, you must also install at least one heat sensor on the body of the stove or stove pipe.

Several manufacturers sell retrofit kits, and may not be available from the stoveretailers. They are not suitable for all types of furnaces. Again, be sure to follow the manufacturer's installation and operating instructions.

A quality wood stove can cost as little as $ 300 purchased. Compare that with $ 850 for a catalytic stove, or $ 2000 for a wood pellet stove.

Choosing the correct size fireplace for your home is very important and easy to find. Multiplying the number of square feet, you want the heat of 35 kJ, we obtain the approximate size BTU stovetheir needs. For example, a house of 1,000 square feet would need a stove to 35,000 BTU.

Ventilatievlamdovers correct is crucial to reducing pollution and maintaining high performance. Before installing the stove, be sure to check with local authorities for building codes and permits, and notify your fire insurance.

Also, consult a certified installer about the need for a bag in your chimney masonry. This line can help maintain a suitable project and preventflour, which can block your chimney. Use recommended by the manufacturer of the diameter of combustion. A wrong size will not have a combustion concepts necessary for the operation of the stove to offer.

If you live near a source of firewood or free, are no longer convenient or popular as a hot stove.

DIY Solar Home – Spend hours later Save

Comments Off

January 24th, 2010 Posted 12:08 am

In a race to keep pace with the times in view of the world energy crisis, pushing the price of energy is even higher and the house design to incorporate new ideas and guidelines. Solar houses are an example of such an effort.

It is even more progress in research and development should be promoted the use of solar energy as a viable source of new energy. Installing solar
the home is becoming more accessible to the public.

There isAnother area in which manufacturers of home that captures the free heat from the sun through passive solar heating. Judkoff According to Ron, Director of Buildings and Heat Center at the National Renewable Energy Lab in Golden, Colorado, passive – solar features increase the cost of building a new house close to everything from nothing to 3 percent. (On a house $ 200,000 for the additional cost no more than the implementation of passive solar heating, only another $ 6000) It's allbased on the design of the house, the effectiveness of these natural processes of sun and wind for heating and cooling natural to exploit.

The small additional cost of building a house with passive solar heating is encouraging because the annual savings from these additional investment costs of passive solar system in the neighborhood of between $ 220 to New Mexico for $ 2255 in New Hampshire. Based on current prices of energy, a passive solar house in a northernStorage location of the freezer for up to $ 67,000 for heating and cooling costs for a period of 30 years.

There is no way the speed with which oil and gas prices will rise is expected in an unstable political scenario of the world. So it is only prudent to prepare for the worst, and will maintain world energy crisis and the risk of increases in energy prices. In the wake of an unexpected increase in prices without a cheap, reliable fuel, millions of homeowners can incur significant economicafflictions. It is appropriate and prudent to consider relying on solar energy as alternative energy source.

The huge savings in energy consumption over a period of 30 years, will more than offset the relatively modest investment, for the integration of passive solar heating. If energy prices are up 10% of the 30-year estimated savings would actually reduce costs for your home is equal to zero.

Many considerations go into designing a solar house, choosing the right place at the designThe house itself and other objects of the fringes are related. Is better to leave the profession to see. Working closely with the architect and contractor to help in the house of your dreams into reality. In this way, you can not go very badly.

In addition to passive solar heating, solar panels, it is possible for other needs for the installation, making it a complete package for your child at home.

Iceland – the world leader in renewable energy

Comments Off

January 23rd, 2010 Posted 12:04 am

In the field of renewable energy, Iceland is one of the world. At present, renewable or green energy sources provide 72% of its electricity needs. And Iceland is one of the few countries with plans to completely familiarize fossil fuels in the near future.

Iceland this energy comes from two main sources of renewable energy, geothermal and hydropower. Currently, the country about 26% of its needs from geothermal power and the restIts numerous hydroelectric plants. The country has several power plants, both types of country, and plans for the development of two geothermal plants in 2010.

Certainly, one could argue that energy supply to a population of about 300,000 is a lot easier than 300,000,000, as in the United States. And Iceland from these sources must be developed because it has a couple of other natural resources. This is particularly true in the early stages of Iceland Industrialdevelopment. The fact that the wrong impression of the current commitment and growth of the country for environmental quality and sustainability. Yes, but came to this place may be a mute point, the fact is that she is currently one of the leading countries in using renewable energy sources, and can not get much for the world to teach. Iceland is a country that has leap-frogged from relative obscurity to international prominence in the field of renewable energy technologies. In many ways, the country is smallminimum size and industrial development in comparison with other developed countries has become a commodity, to leave the country, more agile and less dogmatically devoted to an infrastructure based on consumption of fossil fuels.

Recently, a local engineering firm, and a Californian company Mannvit technology called Carbon Recycling International, began developing the first geothermal plant in the world liquid fuel. The plant will have capacity to produce 4.5 millionliters per year of methanol in the engine fuel mix for general consumption.

So many people know, most homes and businesses in Iceland are heated with hot water, intentionally produced many of the geothermal plants. This very hot water pipes in all major cities, including Reykjavik and Akureyri, and some of the most rural imaginable. Yes, long before the country was producing electricity from geothermal plants, washeating homes. This is obviously an important source of energy for a cold climate, and one of the main reasons why Iceland is such an excellent air quality because they have to burn fossil fuels for heating for most of the population in many many decades.

Iceland is a true innovator in the field of geothermal energy. In a recent draft note has been the development and construction of the world's first geothermal power plant with the Kalinatechnology. This innovation is to draw interest from countries around the world who want to develop new geothermal power plants use the latest technology that is capable of generating much more energy from geothermal fields at low temperature.

One of the last part of the energy that Iceland intends to combat the use of gasoline and here is the land of the plans for the familiarization of petrol was driven around2020, through the use of hydrogen as a fuel only for all cars, trucks, buses and fishing boats.

I am convinced that we will hear much more from this small island nation, just below the Arctic Circle in the coming years and hope that many developed and developing countries begin to follow their example and head forward of the other countries way of thinking.

An Introduction to geothermal heating

Comments Off

January 23rd, 2010 Posted 12:04 am

One of the fastest growing sectors of the development of renewable energy resources is large and diverse area of geothermal heating. Whatever type you choose to meet your needs and location, a geothermal plant can be very stable and scalable. It is likely that the future of geothermal energy is an aspect of it will be found to exist in every home, as part of a diversified package of renewable energy.

Boil until its most basiccomponents, geothermal energy is generated when the heat of the earth (or magma beneath the water near the reservoir pore space) is used to heat the water directly. The water acts as a means of wires, leads the heat to another location. It is also possible to use superheated steam to generate electricity by spinning an industrial-sized turbines. Water can also be used directly for heating, as in greenhouses with hot water pipes under the benches of plants.

Geothermal heatedused in at least the last 2000 years was perhaps more like the Roman baths throughout the former empire can testify. There was a revival of the bathing culture warmed by mid to late 19th century saw the emergence of numerous "healing waters" spa. By the year 1920 the area was popular enough that their electricity for street lighting and electricity in rural areas around these cities, often, usually surrounded by mountains that are needed.

Geysers geothermal plant inNorthern California was once home to one of the world's first geothermal power plants, although they were very inefficient. Later, when the spa fall fashion, the place was home to no fewer than 21 industrial turbine generators, making it the largest such facility in the world. Indeed, while Iceland produces more geothermal energy than the United States, production per capita in the United States dwarfs the tiny island nation.

Improvements in the design of the generator, as a result ofsome typical models of heat generation. The oldest type is called "root dry" and just use the steam as it comes out in a single chamber system showed that the wind turbine. The most modern and efficient use of what is a cycle of "binary" and urged the two chambers are very successful and many manufacturers are switching over when they get the job review. Here, the forms of self-heated water or other liquids may vary pressureimmediately turn it into a vapor, thus turning turbines each blow "like a combustion engine.

One of the most exciting developments in the production of geothermal energy is a relatively new practice of injecting recycled water used in the heating vents or cavity, usually called "hot dry rock". The water is pumped in a little 'is still limited, the increase in pressure. Which is usually pumped into the cold, hoping that the difference between water and rock temperatures will cause more cracks to open and the volume of the cavity to travel, to be filled. When new holes are driven in geothermal and rejuvenated, the site functions normally without limit, until there is no water available.

Approximately one quarter of North America is capable of supporting a heated place their assets where the hot springs that exist in nature. Parts of central and eastern parts of the country is still able to use> Geothermal energy to heat and cool homes and businesses, but options are limited to passive technologies such as heat pump. Here, water or glycol in the injected and circulated underground pipes to exchange heat or the absence of a constant temperature outside the ground. Such systems are always closed when simply circulating in the underground, but also to open systems for intake and outtake pipes under water deep in a lake or a pond.

Thesepassive systems have the advantage that is suitable for owners of homes throughout the world, with almost no moving parts that can not destroy your home and enjoy the peace of equilibrium with the ambient temperature of the soil in your area. For those who live in a very cold climate in winter to obtain, can be the difference between your home heating from 50 to 70F (10-20C), rather than from a typical sub-zero base.

For those looking to explore how the geothermal heat to adapthave a system of sustainable production of energy, there are several organizations that provide detailed information on the subject as part of their mission of defense.

The next century will certainly see a significant expansion of various geothermal technology, and for no other reason that is also planned at affordable prices in a few years. As the benefits of geothermal heat and power production more widely known, it is certain that the heat will be as ubiquitouswindmills and solar panels.